Advertisement
*Only those involved in the work should be in the
vicinity. Children especially must be kept away at
all times.
There may be local regulations concerning noise
which must be complied with by keeping noise levels
within prescribed limits. In certain cases, shutters
should be used to contain noise.
Do not remove, tamper with, or otherwise cause the
tool operating controls to become inoperable.
Do not operate a tool if any portion of the tool
operating controls is inoperable, disconnected,
altered, or not working properly.
Operate the tool within the specified air pressure of
4.0
-
7.0 kgf/cm'G (60
- 100
PSIG) for safety
and longer tool life.
Do
not exceed the recommended
max. operating pressure of 7.0 kgflcm'G
(100
PSIG). The tool should not be connected to a source
whose pressure potentially exceeds 14.0 kgf/cm'G
(200 PSIG).
I
L
Shutter
100 PSIG
100 PSIG
7.0 kgflcm'
6
4
Advertisement
