Table of Contents
Advertisement
Mechanical disassemblies
Disassemble should be made following procedures in numerical order.
Following steps show the basic procedures, therefore unnecessary step may be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original otherwise it may cause
lose of performance and product safety.
Before disassemblies
Ensure that there is nothing protecting from the table
underneath the Smoke Resistant Unit which may harm the
lower surface and in turn cause damage to the indicator.
When disassemblies a cabinet, always turn off the
Projector and Smoke Resistant Unit.
Confirm that the temperature of Projector cool-off and
implement disassembly.
It removes the connection of the signal cable,AC power
cord and each cables the projector.
1.
CABINET BACK REMOVAL.
Hold the upper surface of the Cabinet- back, and remove
in the direction of the arrow while pressing down.
Note;
Be careful not to damage Hook.
The cabinet-back is being fixed with cabinet top by hook.
CABINET TOP
- 4 -
SIGNAL CABLE
AC POWER CORD
HOOK
CABINET BACK
Advertisement
Table of Contents
