Sanyo POA-SP-SU31 Service Manual page 10

Air Filter Replacement
5
Keep pressing the Reset Switch until the FILTER
REPLACE Indicator starts flashing.
6
Take your finger off the Reset Switch within 5 sec
onds of the Indicator starting to flash. If you do not
take your finger off the Reset Switch within 5 sec
onds, the timer reset operation can not be completed.
In that case, repeat the steps from Step 3.
7
Insert a New Air Filter.
Air Filter replacement and timer reset are now com-
pleted.
CAUTION:
1.
Pull up the Lamp Cover.
2.
Remove the Lamp Cover of the Projector using a screw driver.
Note ; Lamp replacement refer to the Owner's Manual of Projector.
Use an approved Air Filter when replacing the Air Filter. If a nonapproved Air Filter is
used, it may result in malfunction of the projector.
LAMP REPLACEMENT
LAMP COVER
FILTER
REPLACE
YELLOW
INDICATOR
PROJECTOR
- 10 -
NEW AIR FILTER
LAMP COVER OF
PROJECTOR
SCREW