Printer Operation; Controls And Indicator Lights - Wayne DW-10 Operation Manuals

2

PRINTER OPERATION

2.1 Controls and Indicator Lights

Front Door Pull
Down Handle
ERROR Light
Red light is on steady
or blinks to show
different errors.
POWER Light
Green light is on
steady when printer
power is on.
Paper Exit
* HEXADECIMAL DUMP mode:
If the TEST button is pressed and held for more than 10 seconds, printer will switch to
HEX-DUMP mode.
POWER light starts flashing and all received data will be printed as hexadecimal codes.
To exit the HEX-DUMP mode, press the TEST button briefly and release.
PRINTER INFO:
When the printer door is opened and then closed, the Wayne print out shown above is printed.
This printout includes printer Model name, Firmware version, baud rate, DIP switches, and
built-in fonts.
_____________________________________________________________________________________
P/N 000-920921- Rev 0D 04/2015
FEED Button
Feeds paper while
button is pressed.
TEST Button
Prints test receipt
with pump CAT data or
printer info depending
on which is being
received when button
*
is pressed.
3