Introduction; Paper Type - Wayne DW-10 Operation Manuals

1

INTRODUCTION

This manual explains the operation of Wayne DW-10 and DW-12 thermal printers used
in Wayne Vista™ and Ovation™ fuel dispensers. The manual contains typical operator
procedures, which includes loading paper, use of the proper paper, clearing paper jams
and a list of printer precautions. The manual also contains a section on service for
Wayne certified technicians.
Once the printer door on the dispenser is unlocked and opened, the printer will appear
as shown in the photo below.

1.1 Paper Type

The recommended paper is the Wayne thermal printer paper, part number 7000701 for
1 Roll and part number 7000703 for a box of 48 Rolls. Paper used in the printer should
comply with specifications of the Wayne paper.
Other printer papers that meet our paper specification include Kansaki P-350 and
Koehler KT55F18 papers with the following:
Inside Core Diameter
Core Annular Thickness
Paper and Core Width
Finished Roll Diameter
Paper should not be stuck to the core with adhesive.
See cautions concerning paper types on the next page.
_____________________________________________________________________________________
P/N 000-920921- Rev 0D 04/2015
.68"-.79"
.10"-.28"
2.32"-2.36"
3.80"-4.00"
1