Safety Precautions - Wayne DW-10 Operation Manuals

4

SAFETY PRECAUTIONS

Before using this printer for the first time, carefully read these "Safety precautions".
Incorrect operation may result in unexpected accidents (fire, shock, or injury).
Neglecting the warnings below may result in printer failure, overheating, emission of smoke,
fire, or electric shock.
Warnings:
Do not use this printer other than for its intended application in the dispenser.
Do not use or store this product in place where it will be exposed to:
 Flames or moist air
 Direct sunlight
 Hot airflow or radiation from a heating device
 Reactive chemicals
 Airborne oil, steel particles, or dust
 Static electricity or strong magnetic field
Do not drop any foreign object or spill liquid into the printer. Do not place any object on
the printer. A metallic foreign object, if accidentally dropped into the printer, may cause
printer failure, fire, or electric shock.
Do not handle the printer in the following ways:
 Do not allow the printer to sustain strong impacts, e.g., dropping, striking with a hard
edge.
 Never attempt to disassemble or modify the printer.
Use or store the printer out of the reach of children.
 Electric appliances could cause an unexpected injury or accident if they are handled
or used improperly.
Please observe the following precautions for power source and power cord:
 Do not plug or unplug the power cord with wet hand.
 Check to make sure that the supply outlet from which the printer is powered has a
sufficient capacity. An overload may cause the power cord to overheat or fire or the
circuit breaker to trip.
 Do not move the printer while the printer power is on.
 Do not attempt to modify the power cord.
12
____________________________________________________________________________________
P/N 000-920921- Rev 0D 04/2015