Turning The Key Tone On And Off; Using The Display Backlight - Radio Shack PRO-95 Owner's Manual

A
changes to
When you turn it off,
" ". You cannot set the attenuator
.
while the scanner is scanning.
Press and then
FUNC ATT
the attenuator to its global mode.
Global ATT.
appears for 2 seconds
a
at the bottom line and or
a
appears. means the attenuator is
-
on and means it is off. Press
to turn the attenuator on or off.
ATTon ATT—
or appears on the
bottom line while scanning.
Press and then
FUNC ATT
turn off the global attenuation
Normal ATT
mode. appears on the
bottom line for about 2 seconds.
Ô
T K
URNING THE EY
O O
N AND FF
Each time you press any of the
scanner's keys, the scanner
sounds a tone. To turn the
scanner's key tone off or on:
1. If the scanner is on, turn
VOLUME OFF/MAX
counterclockwise until it clicks
to turn the scanner off.
2. Turn
VOLUME OFF/MAX
clockwise to turn the scanner
Welcome To Dual Trunking
on.
appears.
Welcome To Dual Trunking
3. While
appears, press to turn on
1
the key tone or to turn it off.
2
U D
SING THE ISPLAY
B
ACKLIGHT
You can turn on the display's
backlight for easy viewing in dimly
to set
-
ATT
again to
T
ONE
Ô
NOTE
If you turn on the
attenuator, the
scanner might not
receive weak signals.
Ô
51