Using The Belt Clip; Transferring Data To And From Another Scanner Or Apc; About Your Scanner - Radio Shack PRO-95 Owner's Manual

U B C
SING THE ELT LIP
You can use the belt clip attached
to the back of the scanner for
hands-free carrying when you are
on the go. Slide the belt clip over
your belt or waistband.
T D
RANSFERRING ATA TO
A
AND FROM NOTHER
S PC
CANNER OR A
You can transfer the programmed
data to and from another PRO-95
scanner using a connecting cable
1
which has / -inch phone plugs on
8
both ends (not supplied). Connect
the cable between each scanner's
jacks. See "Cloning the
PC/IF
Programmed Data" on Page 53.
You can also upload or download
the programmed data to or from a
PC using an optional PC interface
cable (available through your local
RadioShack store) and optional
PC interface software (available at
www.radioshack.com).
ABOUT YOUR
SCANNER
Once you understand a few simple
terms used in this manual and
familiarize yourself with your
scanner's features, you can put
the scanner to work for you. You
simply determine the type of
communications you want to
receive, then set the scanner to
scan them.
A frequency is the receiving signal
location (expressed in kHz or
MHz). To find active frequencies,
you can use the search function.
15