Radio Shack PRO-95 Owner's Manual page 59

then
1. Press
PGM TRUNK
enter the ID program mode.
2. Press and press (or
FUNC
hold) or to select the
bank.
3. Press and select
MODE
4. Press then . The
FUNC 2
Base freq.:
display indicates
406.0000
the first line,
Offset: 380
second line,
Step: 25.0kHz
third line and
the bottom line.
B Base
5. While in blinks, if
necessary, press the desired
Base frequency with the
number keys and press
. Confirm the entry. If it
ENTER
is incorrect, press the number
keys again to set the base
frequency. After you confirm
the input, press
ENTER
O Offset
6. While in blinks, if
necessary, enter the offset
number and press
ENTER
Confirm the entry. If it is
incorrect, then press the
number keys again to set the
frequency. After you confirm
the input, press
ENTER
S Step
7. While in blinks,
repeatedly press or
select the step number,
50.0 12.5 kHz,
or then press
.
ENTER
8. Press to enter the
PGM
program mode. Store the
trunking IDs into the sub-bank
in the same bank.
to
MOT
.
on
on the
on the
on
again.
.
again.
to
25.0
,
59