Listening To The Weather Band; Turning The Key Tone On Or Off - Radio Shack 200CH Owner's Manual

200ch vhf/air/uhf home scanner with scanner control protocol and wx alert
Hide thumbs Also See for 200CH:
Table of Contents

Advertisement

20-422.fm Page 21 Friday, January 7, 2000 12:54 PM
To turn off the priority feature, press
.
PRI
disappears.
ORITY
Note: If you are scanning more than one
bank in which a priority channel has
been programmed, the scanner stops
on the lowest-numbered priority channel
first while scanning.
LISTENING TO THE
WEATHER BAND
The National Oceanic and Atmospheric
Administration (NOAA) uses 7 frequen-
cies to broadcast local forecasts and re-
gional weather information. We have
preprogrammed your scanner with these
frequencies.
Note: For a list of all 7 national weather
frequencies, see "National Weather Fre-
quencies" on Page 22.
To scan the preprogrammed weather
channels, press
.
WX
the scanner searches the weather chan-
nels and stops on an active broadcast. If
a broadcast is weak, press
continue searching through the weather
channels. Press
or
search direction.
Weather Alert
Your scanner's weather alert feature can
warn you when your local weather sta-
tion broadcasts a severe weather emer-
gency signal. (See "Testing Alert Tone").
1. Press
to find the clearest local
WX
weather broadcasting station.
PRI-
When a severe weather emergency sig-
nal is broadcast, the scanner sounds a
loud alarm (regardless of the volume
control setting), and
flashes. The alarm continues until the
emergency signal stops transmitting.
To manually turn off the siren and exit
the weather alert mode, press
Testing Alert Tone
To hear the alert tone, make sure the
scanner is not set to sound an alert tone,
press
tone sounds and the frequency and
TESt
Press
TURNING THE KEY TONE
WX
ON OR OFF
appears, and
The scanner is preset to sound a tone
again to
WX
each time you press any of its keys.
to switch the
Follow these steps to turn the scanner's
key tone on or off.
2. Press
.
ALT
ALERT
broadcast turns off.
H
appears and
, then hold down
WX
alternately appear.
to exit the alert tone mode.
ALERT
1. If the scanner is turned on, turn
counterclockwise until it
VOLUME
clicks to turn it off.
2. Hold down
S/S-LOCKOUT
turn on the scanner.
key tone is off) or
key tone is on) appears for about 3
seconds.
appears and the
ALT
.
ALERT
. The
ALERT
while you
no bEEP
(if the
On bEEP
(if the
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

20-422

Table of Contents