Delay Function In Id Indication Mode; Reviewing Locked-Out Talk Group Ids; Clearing Talk Group Ids - Radio Shack PRO-93 Owner's Manual

1. Press
TEXT
channel and indicating the text name. The ID code
appears as
)+0è444444 )+0è444444 )+0è444444 )+0è444444
2. Press again to cancel.
TEXT

Delay Function in ID Indication Mode

You can set the ID delay function separate from the
channel delay.
1. Press
FUNC
ming the trunked ID.
ý ý ý ý
.
;<C8P ;<C8P ;<C8P ;<C8P ðôòýJ<:FE;J ðôòýJ<:FE;J ðôòýJ<:FE;J ðôòýJ<:FE;J
8 8 8 8
2. Press or
, or
ïôò ïôò ïôí ïôí îôò J<:FE;J îôò
ïôò ïôò ïôí ïôí îôò îôò
3. Press
ENTER
Note: When activated, ID delay watches the control
channel command for the delay time when the signal
disappears from the voice channel.

Reviewing Locked-Out Talk Group IDs

Note: You cannot clear all lockouts from a talk group at
the same time.
1. Press then
PGM
2. Press
FUNC
If the ID memory bank has no locked out ID, you
hear the low beep tone.
3. Press
FUNC
Or, just press
IDs in a bank.

Clearing Talk Group IDs

1. Press then
PGM
2. Press ,
FUNC
3. Press
FUNC
62
while the scanner is receiving the voice
or
! è4444 ! è4444 ! è4444 ! è4444
then while you are program-
./DELAY
1J<ý 1Gó FNEý B<PJý KFý J<Ký % 1J<ý 1Gó FNEý B<PJý KFý J<Ký %
1J<ý 1Gó FNEý B<PJý KFý J<Ký % 1J<ý 1Gó FNEý B<PJý KFý J<Ký %
appears.
9 9 9 9
to select
*FE< *FE< *FE< *FE<
.
J<:FE;J
J<:FE;J J<:FE;J
.
.
TRUNK
then . The locked out ID appears.
L/OUT
8 8 8 8 9 9 9 9
then or to select a search bank.
8 8 8 8 9 9 9 9
or to search for any locked out
.
TRUNK
8 8 8 8 9 9 9 9
or to select ID memory.
then .
CL
Trunking Operation
.
, , , , ,
òôí òôí òôí òôí ñôò ñôò ñôò ñôò ñôí ñôí ñôí ñôí ðôò ðôò ðôò ðôò
,
ðôí ðôí ðôí ðôí