Special Features; Using The Delay Function; Locking Out Channels Or Frequencies; Locking Out Channels - Radio Shack PRO-92 Owner's Manual

20-522.fm Page 48 Friday, September 17, 1999 12:46 PM

SPECIAL FEATURES

USING THE DELAY FUNCTION

Note: The delay function turns on automatically when
you turn on the scanner.
Many conversations might have a pause of several sec-
onds between a query and a reply. To avoid missing a re-
ply, you can program a 2-second delay into any of your
scanner's channels. Then, when the scanner stops on
the channel, D appears on the display and the scanner
continues to monitor the channel for 2 seconds after the
transmission stops before it resumes scanning or search-
ing.
You can program a 2-second delay in any of three ways.
• If the scanner is scanning and stops on an active
channel, quickly press
before it starts to scan again .
• If the desired channel is not selected, manually
select the channel then press
.
DELAY
• If the scanner is searching and also stopped or
paused, press
FUNC
in a search bank .
LOCKING OUT CHANNELS OR
FREQUENCIES
You can scan existing channels or search frequencies
faster by locking out channels or frequencies that have a
continuous transmission, such as a weather channel.

Locking Out Channels

To lock out a channel while scanning, press
the scanner stops on the channel. To lock out a channel
manually, select the channel then press
pears on the display.
48
then press
FUNC
then press
FUNC
then press to set a delay
DELAY
L/OUT
until
L/OUT
DELAY
when
L ap-