only when you are sure the scanner is not working prop-
erly.
1. Turn off the scanner, then turn it on again.
0Fý L8Cý0ILEB@E>
0Fý L8Cý0ILEB@E>
0Fý L8Cý0ILEB@E>
0Fý L8Cý0ILEB@E>
2. Press
then
0
appears.
%E@K@8C@Q@E>ý ,C<8J<ý 38@Kô
%E@K@8C@Q@E>ý ,C<8J<ý 38@Kô
%E@K@8C@Q@E>ý ,C<8J<ý 38@Kô
%E@K@8C@Q@E>ý ,C<8J<ý 38@Kô
about 2 seconds.
Note: Do not turn off the scanner until the initialization is
complete. When the initialization is complete
pears on the top line of the display.
pears on the bottom line.
CARE
Keep the scanner dry; if it gets wet, wipe it dry immedi-
ately. Use and store the scanner only in normal tempera-
ture environments. Handle the scanner carefully; do not
drop it. Keep the scanner away from dust and dirt, and
wipe it with a damp cloth occasionally to keep it looking
new.
Modifying or tampering with the scanner 's internal com-
ponents can cause a malfunction and might invalidate its
warranty and void your FCC authorization to operate it. If
your scanner is not performing as it should, take it to
your local RadioShack store for assistance.
80
appears.
while
1
3<C:FD<ý 0Fý
3<C:FD<ý 0Fý
3<C:FD<ý 0Fý
3<C:FD<ý 0Fý
Troubleshooting
3<C:FD<
3<C:FD<
3<C:FD<
3<C:FD<
L8Cý 0ILEB@E>
L8Cý 0ILEB@E>
L8Cý 0ILEB@E>
L8Cý 0ILEB@E>
appears for
ap-
)òòò
)òòò
)òòò
)òòò
ap-
â8EBý òý á?ý òò
â8EBý òý á?ý òò
â8EBý òý á?ý òò
â8EBý òý á?ý òò