Storing Trunking Frequencies Into Channels - Radio Shack PRO-93 Owner's Manual

3. Use the number keys and
quency (including the decimal point) you want to
store.
If you make a mistake, press
digit or press and hold
all digits.
4. Press
ENTER
nel.
Notes:
• If you made a mistake in Step 3,
briefly appears and the scanner beeps when you
press
ENTER
• Your scanner automatically rounds the entered fre-
quency to the nearest valid frequency. For example,
if you enter a frequency of 151.553, your scanner
accepts it as
• To have the scanner pause for 2 seconds on this
channel after a transmission before proceeding to
the next active transmission, press
the delay function on. See "Using the Delay Func-
tion" on Page 42. The scanner stores this setting in
the channel.
5. If necessary, press
mode.
6. If desired, program a text tag for the channel (see
"Assigning a Text Tag to a Channel" on Page 27).
7. The next channel in sequence is ready for program-
ming. Press
STORING TRUNKING FREQUENCIES
INTO CHANNELS
1. Press and
PGM
desired bank to program.
2. Press
TRUNK
26
/
. DELAY
about 2 seconds to delete
CL
to store the frequency into the chan-
. Start again from Step 3.
.
ñíñôííò ñíñôííò
ñíñôííò ñíñôííò
to change the receiving
MODE
and then repeat steps 3 through 6.
PGM
8 8 8 8
then
FUNC
to enter into trunking mode.
Operation
to enter the fre-
to delete a single
CL
%EM8C@;ý "I<H %EM8C@;ý "I<H
%EM8C@;ý "I<H %EM8C@;ý "I<H
/ to turn
. DELAY
9 9 9 9
or to select the