Installing The Electrodes; Attached Quick Guide - OHAUS STARTER 2100 Instructions Manual

STARTER 2100 Bench pH Meter
2.4

Installing the electrodes

Connect the pH electrode to the meter. There are 3 Socket for pH electrode. The BNC (pH), Cinch
(Temp.) and banana (REF) socket.
For ST210, you only need to connect the pH electrode with the pH socket (BNC);
For temperature electrode STTEMP30, connect with Temp. Socket (Cinch).
For pH electrode ST310, connect both the BNC and Cinch socket.
The banana (REF) socket is only for separate Reference Electrode. (e.g. STREF1)
2.5

Attached quick guide

Another unique design of the STARTER 2100 is the attached quick guide, the quick guide is
attached into the bottom housing of the meter.
EN-7