Identifying A Trunked Frequency - Radio Shack PRO-528 User Manual

Important: If you are scanning any
system other than a Motorola Type
I system, be sure status bit ignore
is set to ON or you will miss some
transmissions.
Follow these steps to turn status bit ignore
on or off.
1. Set the scanner to conventional
programming mode and then press
TRUNK.
2. Select the bank.
3. Repeatedly press
Motorola Type, then press E/PGM.
4. Repeatedly press
bit, then press E/PGM.
5. Repeatedly press
or OFF, then press E/PGM.

identifying a trunked frequency

While ID scanning (looking for IDs within
a trunked system) or performing an ID
search, press
frequency. (The frequency fl ashes twice.)
Then hold down
tone sounds and the ID and the frequency
alternately appear.
To return to normal operation, press
Beyond the Basics
or
or
or
to see the current trunked
until a confi rmation
59
to select
to select S-
to select ON
.