Selecting A Preset Fl Eet Map; Programming A Fl Eet Map - Radio Shack PRO-528 User Manual

Beyond the Basics
selecting a preset fl eet map
1. Set the scanner for conventional
scanning and press E/PGM, then
press TRUNK to select the trunking
programming mode and the bank you
want to change.
2. Repeatedly press
TYPE 1 SYSTEM (E1), then press E/
PGM.
3. Repeatedly press
FLEEt, then press E/PGM.
4. Repeatedly press
name of the desired map (example
E1P7). The preprogrammed fl eet map
appears.
5. Press E/PGM. FLEEt displays.
Note: When the scanner searches
for transmissions, Type I fl eet and
Notes
subfl eet IDs such as 100-12, 100-9,
000-12, or 400-8 display.
If you are still unable to listen to a complete
conversation, then try another preset map.
programming a fl eet map
1. Select the trunking programming mode
and the bank you want to change.
2. Repeatedly press
1 System (E1), then press E/PGM.
or
or
or
or
74
to select
to select
to select the
to select Type