Service Information; Jumper Setting On Hard Disk Drive - Sony VAIO PCV-MXS10 Service Manual

4-1. JUMPER SETTING ON HARD DISK DRIVE

The hard disk drive of service parts can be used without changing factory jumper setting, when it was replaced for service.
Part No.
A-8058-425-A
Configuration Jumper Settings
Master/Slave
Cable Select
4092 Cylinder Limitation
SECTION 4

SERVICE INFORMATION

Maker Code
Seagate ST380020A
Only drive in signal drive system
Master drive in a dual drive system
Slave in a dual drive system
Enabled
Enabled
(END)
Capacity
(formatted)
80 GB
7 5 3 1
Master/Slave selection
Jumper setting
8 6 4 2
4092 Cylinder Limitation
Factory Reserved
Cable Select
Master/Slave
4-1
Memo
Confidential
PCV-MXS10 (UC)