Cpu - Sony VAIO PCV-MXS10 Service Manual

2-18. CPU

CPU
5 Remove the stoppers.
• CPU INSTALLATION
Note : When CPU and heat sink are replaced,
install new ones after thermal diffusion
grease is wiped off and silicon compound
is applied to the place shown in the figure.
Thermal diffusion grease : silicon compound (G-765) 90G
Amount to apply
9
8
7 Remove the claw.
6 DC fan
(with heat sink)
: 0.5 g (as the same size as the tip of a match)
CPU
1 Remove the connector (3P)
of the DC fan.
3
2
grease
*
2-11
4
Take care not to apply the grease
to any other places because it has
high conductivity.
Confidential
PCV-MXS10 (UC)