Service Information; Jumper Setting On Hard Disk Drive - Sony VAIO PCV-R522DS Service Manual

4-1.

JUMPER SETTING ON HARD DISK DRIVE

The hard disk drive of service parts can be used without changing factory jumper setting, when it was replaced for service.
Model
PCV-R522DS/R526DS
Model
PCV-R528DS
SECTION 4

SERVICE INFORMATION

Part No. Maker
1-759-991-11 MAXTOR
Part No. Maker
1-772-329-11 SEAGATE
Capacity
Code
(formatted)
91080D5 10.8 GB
Master/Slave selection
Jumper setting
J42 Factory Reserved
J44 Factory Reserved
J46 4092 Cylinder Limitation
J48 Cable Select
J50 Master/Slave
Configuration Jumper Settings
Only drive in signal drive system
Master drive in dual drive system
Slave drive in dual drive system
Capacity
Code
(formatted)
ST313030A 13 GB
2 4 6 8
1 3 5 7
Slave
Master or single drive
Enable cable select
Master with non-ATA
compatible slave
Limit capacity to 2.1 Gbytes
(4,092 cylinders)
4-1
Factory setting
Factory setting
PCV-R522DS/R526DS/R528DS