Remote Control - Vehicles With: Passive Anti-Theft System (Pats) - Ford TRANSIT 2018 Owner's Manual

Table of Contents

Advertisement

Integrated Keyhead Transmitter
E138619
1.
Twist a thin coin in the slot of the
transmitter near the key ring to remove
the battery cover.
2. Remove the old battery.
E138620
3. Insert the new battery. Refer to the
instructions inside the transmitter for
the correct orientation of the battery.
Press the battery down to make sure
it is fully in the housing.
4. Reinstall the battery housing cover
onto the transmitter.
Locating Your Vehicle
Press the lock button on the remote
control twice within three seconds. The
horn sounds and the direction indicators
flash.
2018 Transit (TTH) Canada/United States of America, JK3J 19A321 AA enUSA, Edition date: 201705, First Printing
Keys and Remote Controls
Note: If locking was not successful, any
door is open, or if the hood is open on
vehicles with an alarm or remote start then
the horn sounds but the direction indicators
do not flash.
Switching the Panic Alarm On and
Off
Press the button on the remote
control to switch the panic alarm
on. Press the button again or
E138624
switch the ignition on to switch the panic
alarm off.
We recommend you do not use this
method to locate your vehicle.
Note: The panic alarm only operates when
the ignition is off.
REMOTE CONTROL - VEHICLES
WITH: PASSIVE ANTI-THEFT
SYSTEM (PATS)
Integrated Keyhead Transmitter
Equipped)
E177585
Use the key blade to start your vehicle and
unlock or lock the driver door from outside
your vehicle.
56
(If

Advertisement

Table of Contents
loading

Table of Contents