Ford TRANSIT 2018 Owner's Manual page 299

WARNINGS
hub so they do not interfere with the
mounting surfaces of the wheel. Installing
wheels without correct metal-to-metal
contact at the wheel mounting surfaces
can cause the wheel nuts to loosen and
the wheel to come off while your vehicle
is in motion, resulting in loss of vehicle
control, personal injury or death.
Only use the specific lug nuts and
wheels supplied with your vehicle. If
in doubt, contact an authorized
dealer.
Do not install alloy wheels using lug
nuts designed for use with steel
wheels.
The lug nuts of alloy wheels and
spoked steel wheels can also be
used for the steel spare wheel for a
short time (maximum two weeks).
1. Install the wheel.
2018 Transit (TTH) Canada/United States of America, JK3J 19A321 AA enUSA, Edition date: 201705, First Printing
Wheels and Tires
E70961
2. Install all of the lug nuts and partially
3. Lower your vehicle and remove the
4. Fully tighten all of the lug nuts in the
5. Install the wheel trim.
Note: Make sure that the cones on the lug
nuts are against the wheel.
Note: Alloy wheel lug nuts are suitable for
use on a steel spare wheel.
Note: If the spare wheel is not the same
type and size as your vehicle road wheel
replace it as soon as possible.
296
1
3
5
6
4
2
tighten them in the sequence shown.
vehicle jack.
sequence shown.
4
2
1
3
5