Table of Contents
Advertisement
HD Radio Reception and Station Troubleshooting
Potential reception issues
Reception area
Station blending
In order to provide the best possible experience, use the contact form to
report any station issues found while listening to a station broadcasting
with HD Radio technology. Independent entities own and operate each
station. These stations are responsible for making sure all audio streams
and data fields are accurate.
Issue
Echo, stutter, skip or
repeat in audio.
Increase or decrease
in audio volume.
2015 Police (pol)
Owners Guide gf, 2nd Printing, April 2015
USA (fus)
Audio System
If you are listening to a multicast station and
you are on the fringe of the reception area,
the station may mute due to weak signal
strength.
If you are listening to HD1, the system
switches back to the analog broadcast until
the digital broadcast is available again.
However, if you are listening to any of the
possible HD2 through HD7 multicast
channels, the station mutes and stays muted
unless it is able to connect to the digital
signal again.
When the system first receives a station
(aside from HD2-HD7 multicast stations), it
first plays the station in the analog version.
Once the receiver verifies the station is an HD
Radio station, it shifts to the digital version.
Depending on the station quality, you may
hear a slight sound change when the station
changes from analog to digital. Blending is the
shift from analog to digital sound or digital
back to analog sound.
Potential station issues
Cause
This is poor time
alignment by the radio
broadcaster.
315
Action
No action required.
This is a broadcast
issue.
Advertisement
Table of Contents
