Introduction; Features - Dekolink Deko4078SD Product Manual

P M
RODUCT ANUAL
1

INTRODUCTION

Deko4078SD Digital Multi-Channel Signal Booster provides cost effective indoor and
outdoor communications coverage for the complete 700/800MHz Public Safety
spectrum assigned to the wireless networks.
Deko4078SD meets public safety infrastructure design requirements that include
higher base station site elevation, higher power output per channel, transmission
only on traffic channels that are in use and single receiver omni-directional site.
The system supports advanced Digital Signal Processing (DSP) technology,
programmable digital filters - where each filter supports up to 24 channels, and
programmable bandwidth of up to 12 MHz. These capabilities enable the user to
quickly and simply customize the Booster according to changing site requirements.
A SmartALC power control algorithm automatically optimizes the gain setting by
learning the actual range of RSSI levels over a user-specified period of time. The
SmartALC algorithm prevents oscillations, reduces the amount of isolation required
by the system and optimizes the system to minimize noise rise at the donor cell site.
An intuitive GUI based Management Tool (RMT) provided with the Booster is used to
configure, monitor and manage the Booster through an Ethernet connection to the
system.
1.1 F
EATURES
• 95 dB RF gain
• Composite Output Power:
• Downlink: + 40 dBm
• Uplink: + 27 dBm
• Up to 24 channels per system with software defined channel frequency
• Software defined filter bank supporting up to 100 filters
• Filter bandwidth selection of 12.5KHz to 4.5 MHz
P/N 300SC30031 Rev. 1.2
D 4078SD M -C
EKO ULTI HANNEL
Figure 1. Deko4078SD
Proprietary Data
S B D
IGNAL OOSTER EKOLINK
W L .
IRELESS TD
Page 9