Table of Contents
Advertisement
P
M
RODUCT
ANUAL
4. In the Items list, select "Internet Protocol (TCP*IP)" and click the
Properties button. The "Internet Protocol (TCP/IP) Properties" dialog appears.
Note: The Booster is supplied with the default IP address 192.168.1.253.
5. Assign your computer an IP address in the same subnet, in order to
communicate with the unit.
•
In the IP address area:
•
Enter the IP address 192.168.1.x, where 'x' can be any number between 2 and
250 inclusive. For example, (192.168.1.9)
•
Define the subnet mask as shown (255.255.255.0)
•
Click OK.
The computer communication parameters are now defined and you can open a
session to the Booster.
4.1.3
L
OGIN TO THE
NOTE: The booster is factory assigned the address 192.168.1.253. You will login for the
first time using this address and make the necessary modifications according to
information provided by your network administrator.
To login to the booster
1. Open one of the Flash-enabled browsers listed in the system requirements.
2. In the address line, enter the provided IP address of the Booster. A session will
be established with the Booster an the login dialog appears.
Page 22
D
4078SD M
-C
EKO
ULTI
HANNEL
S
B
IGNAL
OOSTER
Proprietary Data
S
B
D
IGNAL
OOSTER
EKOLINK
P/N 300SC30031 Rev. 1.2
W
L
.
IRELESS
TD
Advertisement
Table of Contents
