Table of Contents
Advertisement
P
M
RODUCT
ANUAL
2. In the
isolation parameters. The application calculates the Max gain (dB) accordingly.
3. In the
parameter which determines the signal boosters' signal range. The Low limit is
automatically determined according to the configured
Note: The attack and release times can be configured. See Step 5.
4. Determine the number of filters to be allocated for each band. Select the
required filter configuration in the Downlink Routing field area.
Note: The default setting is 12 Filter for 700MHz, 12 Filters for 800MHz.
The filter configuration selected here determines the maximum number of filters
that can be added when configuring the filters for the 700 and 800 bands (see
4.2.3).
5. Click the Advanced Installation window and define the parameters displayed
in the
field areas. In addition, the
input signal range determined in the
Page 24
D
4078SD M
-C
EKO
ULTI
HANNEL
Isolation Settings
field area, determine the Isolation and Back off
Input Window
field area, configure the Input window High Limit
General
in Path offset
(i.e.
Attack
Figure 12. Advanced Installation Tab
Proprietary Data
S
B
D
IGNAL
OOSTER
EKOLINK
High limit
Marker Tone, PL Mode
) and
Release
and
times can be configured for the
General Settings
tab.
W
L
.
IRELESS
TD
.
(For analog – FM)
P/N 300SC30031 Rev. 1.2
Advertisement
Table of Contents
