Check Cross Talk(S); White Color Adjustment; Mechanical Characteristics; Mechanical Data Files - Philips 192E1SB/70 Service Manual

Meridian 1
80

4.5 Check Cross talk(s)

Apply Pattern 2. Set contrast and brightness at 100 %. Measure YA. Then output Pattern 3 and measure YB. The
cross talk value:

4.6 White Color adjustment

There are three factory preset white color 9300K, 6500 and sRGB align by FGA function.
Apply full gray 64 pattern, with brightness in 100 % position and the contrast control at 50 % position.
The 1931 CIE Chromaticity (color triangle) diagram (x, y) coordinate for the screen center should be:
Product specification
5

Mechanical characteristics

5.1 Cosmetic

5.2 Mechanical data files

5.3 Location of Philips Logo

5.4 Gap between panel and front bezel

5.5 Location of Control Icons

5.6 Color for resin/paint

5.7 Fire enclosure request

5.8 Resins

RoHS required
WEEE required.
Resin type/selection refers to Project Book Section 7.2 Plastic material.

5.9 If paint is used

RoHS required
WEEE require
If new painting type needs to implement, refer to UN-D 1235.

5.10 Plastic mold tooling

Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush, weld lines, gate
marks, ejector marks, etc.). Refer to "TYV61-90007".
Painting to cover up cosmetic defects due to molding is strongly discouraged.
China RoHS mark requested.
ABS (YA - YB)
CIE coordinates
9300K
6500K/sRGB
sRGB
Philips ID
ProE files required
< 1.4mm (Max.)
Per Philips make-up sheet
X 100%
YA
(x,y)
x = 0.283 ± 0.015 y = 0.297 ± 0.015
x = 0.313 ± 0.015 y = 0.329 ± 0.015
x = 0.313 ± 0.015 y = 0.329 ± 0.015
Per Philips make-up sheet
Per Philips Graphic sheet
Shielding cover should fulfill international standard
< 1.5 %