General Product Specification - Philips 192E1SB/70 Service Manual

Meridian 1
70

18. General Product Specification

TABLE OF CONTENTS
1. FOREWORD
2. PRODUCT PROFILE
2.1 LCD
2.2 SCANNING FREQUENCIES
2.3 AMBIENT TEMPERATURE: 0 -40
3. ELECTRICAL CHARACTERISTICS
3.1 INTERFACE SIGNALS
3.2 INTERFACE
3.3 TIMING REQUIREMENT
3.4 HORIZONTAL SCANNING
3.5 VERTICAL SCANNING
3.6 POWER INPUT CONNECTION
3.7 POWER MANAGEMENT (SUPPORT TO INPUT)
3.8 VGA DISPLAY IDENTIFICATION
3.9 DDC/CI SUPPORT
3.10 DATA FOR EDID & INF FILE
3.11 HOT-KEY DEFINITION
4. VISUAL CHARACTERISTICS
4.1 TEST CONDITIONS
4.2 BRIGHTNESS
4.3 IMAGE SIZE
4.4 BRIGHTNESS UNIFORMITY
4.5 CHECK CROSS TALK(S)
4.6 WHITE COLOR ADJUSTMENT
5. MECHANICAL CHARACTERISTICS
5.1 COSMETIC - - Philips ID
5.2 MECHANICAL DATA FILES ------ PROE FILES REQUIRED
5.3 LOCATION OF PHILIPS LOGO ------- PER PHILIPS MAKE-UP SHEET
5.4 GAP BETWEEN PANEL AND FRONT BEZEL ------- <1.4mm (type), AGREED BY PHILIPS.
5.5 LOCATION OF CONTROL ICONS ------- PER PHILIPS GRAPHIC SHEET
5.6 COLOR FOR RESIN/PAINT ------- PER PHILIPS MAKE-UP SHEET
5.7 RESINS
5.8 IF PAINT IS USED
5.9 PLASTIC MOLD TOOLING
5.10 PLASTICS FLAMMABILITY
5.11 TEXTURE/GLOSSING OF HOUSING
5.12 TILT AND SWIVEL BASE
5.13 KENNSINGTON LOCK
5.14 LABEL
5.15 PRODUCT DIMENSION/WEIGHT (REFER TO PHILIPS APPROVED SHT 191)
5.16 TRANSPORTATION