Philips 192E1SB/70 Service Manual page 74

Meridian 1
74
3.2.2 DVI-D Cable
The input signals are applied to the display through DVI-D cable
Length
Connector type
Pin assignments
3.2.3 Audio Cable
Length
Connector type
6 Red GND
7 Green GND
8 Blue GND
9 DDC +3.3V or +5V
10 Logic GND
11 Sense (GND)
12 Bi-directional data
13 H/H+V sync
14 V-sync
15 Data clock
1.5m +/- 50mm
DVI-D male with DDC-2B pin assignments
White connector thumb-operated jackscrews
PIN No. SIGNAL
1 T.M.D.S. data2-
2 T.M.D.S. data2+
3 T.M.D.S. data2 shield
4 No Connect
5 No Connect
6 DDC clock
7 DDC data
8 No Connect
9 T.M.D.S. data1-
10 T.M.D.S. data1+
11 T.M.D.S. data1 shield
12 No Connect
13 No Connect
14 +5V Power
15 Ground (for +5V) – Cable detect
16 Hot plug detect
17 T.M.D.S. data0-
18 T.M.D.S. data0+
19 T.M.D.S. data0 shield
20 No Connect
21 No Connect
22 T.M.D.S clock shield
23 T.M.D.S. clock+
24 T.M.D.S. clock-
1.5m +/- 50mm
3-5 mini jacks with color on the both end heads.
Sliver & black model: black heads and cable
T color model: green heads and white cable.