Using The Keypad Diagnostic; Resetting The Htx-200 - Radio Shack HTX-200 Owner's Manual

USING THE KEYPAD DIAGNOSTIC

The HTX-200 has a built-in diagnostic program that lets you con-
firm whether the keypad switches are functioning correctly. To
use this diagnostic program, follow these steps.
1. Hold down
2. Press
MO
3. Press . If the action is correct,
4. Press . If the action is correct,
5. Press
MR (MW)
6. Press
SC (RPT)
7. Press
appears.
8. Press
LOCK (C)
9. Press
FUNC
10. Press
MO (REV)
briefly and then the set frequency appears again.

RESETTING THE HTX-200

If the transceiver's display locks up or the transceiver does not
work properly after you turn it on, you might need to reset it.
Caution: This procedure clears all the information you have pro-
grammed into the transceiver. Before you reset the transceiver,
try turning it off then on again to see if it begins working properly.
To reset the transceiver, turn it off then hold down
turn it on again.
tion. Release
FUNC
44
( ) and turn on the transceiver.
MO REV
( ) again. PrESS dn
REV
. If the action is correct,
. If the action is correct,
. If the action is correct,
(BEEP)
. If the action is correct,
. If the action is correct,
. If this action is correct,
iniTial
appears to confirm the reset opera-
+ .
MO
appears.
appears.
PrESS Up
PrES Mr appears.
PrESS Sc
PrESS bp
appears.
F
appears.
PrES Mo
GOOD
FUNC
appears.
appears.
PrESS Lc
appears
+ and
MO