A Quick Look At The Display - Radio Shack HTX-200 Owner's Manual

A QUICK LOOK AT THE DISPLAY

1
2
3
4
5
1. F: appears when the FUNC key is pressed.
2. TX: appears when the radio is transmitting.
3. BUSY: appears when the radio receives a signal.
4. CALL: appears when tone squelch is on and the radio receives a
matching tone.
5. : indicates the battery strength.
6. S-RF (Signal/RF Indicator): shows the level of an incoming signal.
When transmitting, shows the relative output signal strength.
7. BAT: appears when you turn on the radio — the signal strength
meter then indicates the battery strength.
8.
Bars show remaining battery power when MO and PTT switch are
held down at the same time.
9. Alpha-Numeric Display: shows frequency and messages.
10. Memory Location: shows the memory channel in use.
11. MR (Memory Channel indicator): for use or for programming.
12. : paging tone active.
13. : key tone enabled.
14. : keypad control disabled to prevent accidentally
changing a setting.
15. PS: appears when power save is enabled.
16. TSQ: appears when Tone Squelch (CTCSS) is enabled.
17. ã : appears to indicate a positive repeater offset. – indicates a nega-
tive repeater offset.
22
17 16
6 7
: the stronger the signal, the more boxes appear.
15 14 13 12
8 9 10 11