Radio Shack HTX-200 Owner's Manual page 20

Key/Control
(T.SET)
MO (REV)
(BEEP)
MR (MW)
SC (RPT)
20
Use it to:
Change (decrease) the
frequency by the value
set for CS (see the first
menu option on Page
16).
Press to override
squelch. Press and
hold to cycle through
rC , tC , rPt , and CS
settings.
Turn on the display's
backlight for 4 seconds.
Enter memory setting
MR
mode. and the last
used memory location
appear.
Starts and stops scan-
ning. Hold down and
power on to access
expanded band cover-
age
(142–150 MHz).
Use with the
FUNC + Key to:
Accesses the Tone
Set Option menu
and settings.
Reverse the
repeater offset.
Enable/disable the
key tone.
appears when the
key tone is
enabled.
In memory mode,
starts the display
flashing. Then use
or to
access a fre-
quency to store in
a memory location.
Set the radio to
simplex or duplex
mode when in
VCO mode. Set
the repeater offset
for a memory loca-
tion when in mem-
ory mode.