Temporarily Locking Out (Skipping) Locations
During Memory Scanning
You can set the transceiver to lock out a location while scanning
the frequencies stored in memory.
When the transceiver stops at a memory location you want to
briefly appears and the transceiver con-
tinues to scan, locking out (skipping) that location from then on.
Repeat this for each location you want to skip.
To cancel the settings and have the HTX-200 include the skipped
frequencies once again, turn the radio off then on again.
Note: You cannot lock out all memory locations. One location is
always active. If you lock out all but two active locations and then
lock out one more,
briefly appears and scanning stops.