Configuring A Vlan Group - Cisco Nexus 9000 Series Configuration Manual

Configuring the Catena Solution
If the egress port has multiple ports, then traffic is load balanced.
Note
SUMMARY STEPS
1. configure terminal
2. catena port-group port-group-name
3. interface interface-reference
4. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 catena port-group port-group-name
Example:
switch(config)# catena port-group pg1
Step 3 interface interface-reference
Example:
switch(config-port-group)# interface Eth 2/2
switch(config-port-group)# interface Eth 2/3
switch(config-port-group)# interface Eth 2/4
switch(config-port-group)# interface Eth 2/5
Step 4 copy running-config startup-config
Example:
switch(config)# copy running-config startup-config

Configuring a VLAN Group

To create and configure a VLAN group:
Purpose
Enters global configuration mode.
Creates a catena port group, and enters port group
configuration mode.
Configures active catena ports, with link-based
tracking enabled by default.
(Optional)
Copies the running configuration to the startup
configuration.
Cisco Nexus 9000 Series NX-OS Catena Configuration Guide, Release 7.x
Configuring a VLAN Group
9