Configuring Mac Table Manipulation - Cisco HWIC-4ESW User Manual

How to Configure EtherSwitch HWICs
Router# show spanning-tree vlan 200
<output truncated>
Spanning tree instance for VLAN 200 does not exist.
Router#

Configuring MAC Table Manipulation

Port security is implemented by providing the user with the option to make a port secure by allowing only
well-known MAC addresses to send in data traffic. Up to 200 secure MAC addresses per HWIC are
supported.
•
•
•
Enabling Known MAC Address Traffic
Follow these steps to enable the MAC address secure option.
SUMMARY STEPS
1.
2.
3.
4.
5.
Book Title
46
Enabling Known MAC Address Traffic, page 46
Creating a Static Entry in the MAC Address Table, page 47
Configuring and Verifying the Aging Timer, page 49
enable
configure terminal
mac-address-table secure mac-address fastethernet interface-id [vlan vlan-id]
end
show mac-address-table secure
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards