Cisco HWIC-4ESW User Manual page 88

How to Configure EtherSwitch HWICs
Command
Step 6
show running-config
Example:
Router: show running-config
Step 7
copy running-config startup-config
Example:
Router# copy running-config
startup-config
To reenable spanning tree on the interface, use the no bridge-group bridge-group spanning-disabled
interface configuration command.
Book Title
88
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Purpose
Verifies your entry.
(Optional) Saves your entry in the configuration file.