JVC KD-DV8306 Instructions Manual page 50

Dvd/cd receiver
Hide thumbs Also See for KD-DV8306:
Table of Contents

Advertisement

Available languages

Available languages

Symptom
• Tracks cannot be played back.
• Noise is generated.
• While playing a track, sound is sometimes
interrupted while listening to a USB
device.
• Longer readout time is required.
• "Reading" appears on the display while
listening to a USB device.
• Tracks cannot play back as you have
intended them to play.
• No sound can be heard when the picture is
displayed while playing a DivX/MPEG Video
file.
• Elapsed playing time is not correct.
• "Please Eject" appears on the display while
listening to a disc.
• "No Files" or "No USB" appears on the
display while listening to a USB device.
• Correct characters are not displayed (e.g.
album name).
50
Remedy/Cause
• Record the tracks using a compliant application on the
appropriate discs (see page 6).
• Add the extension code <.divx>, <.div>, <.avi>,
<.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to
the file names.
The track played back is not an MP3/WMA/WAV track. Skip
to another track. (Do not add the extension code <.mp3>,
<.wma>, or <.wav> to non-MP3/WMA/WAV tracks.)
MP3/WMA/WAV tracks have not been properly copied into
the USB device.
Copy MP3/WMA/WAV tracks again into the USB device, and
try again.
• Readout time varies according to the complexity of the
folder/file configuration.
• Readout time varies depending on the USB device.
• Do not use too many hierarchical levels, folders, or empty
folders*.
• Turn off the power then on again.
* A folder that is physically empty or that contains data but
does not contain valid MP3/WMA/WAV tracks.
Playback order was determined when the files were
recorded.
• Record the audio track using MP3 or Dolby Digital for the
audio stream of DivX files.
• Record the audio track using MPEG1 Audio Layer 2 as the
audio stream for MPEG Video files.
This sometimes occurs during playback. This is caused by
how the tracks were recorded.
• Insert a disc that contains tracks encoded in an appropriate
format.
• Connect a USB device that contains tracks encoded in an
appropriate format.
• The total number of tracks recorded on the USB device
could not be accessed properly.
This unit can display Roman and Cyrillic alphabets
(capital/small), numbers, and a limited number of Chinese
(traditional/simplified), Korean, and Thai characters and
symbols. See also pages 36 and 42.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kd-dv8305

Table of Contents