Omron 3G3MV-AB001 Migration Giude page 8

The shape of terminal screw used for control circuit terminal differs on MV or MX.
MV: Minus
MX: Plus
Please be careful at wiring.
*１ When connecting 100V or 200V series on a relay output terminal block, please use 0.75mm
When equal or more 7 wires on control circuit terminal block. Please use shield wire of equal or less 0.5mm
The length to signal line armor is 5 to 6mm and connect it as an electrical wire. (If stranded wire, keep it from
coming apart).
The max armor outer dimensions of signal line(except alarm signal line) is equal ore less 2.00mm.
(Regarding mark tube and multi-conductor cable: mark tube at the fixed position equal or less 40mm from
connection end to sheath length. Set multi-conductor cable equal or less 40mm from connection end to
sheath length. If the line is too thick, terminal block cover possibly does not close).
2
.
2
.
8