Before You Begin - Electrolux ETE4607SA-R Installation Manual

4 electrolux.com.au

BEFORE YOU BEGIN

• Thoroughly inspect cabinets for any signs of damage
before commencing installation.
• If any damage is identified please contact Electrolux
Service.
• Check refrigerator recess dimensions and ensure
that they provide at least the minimum clearance at
the back, side and top as recommended on page 2.
• The floor where the refrigerator is to be placed must
be level, otherwise you will not be able to install your
refrigerator properly.
• Ensure that the floor and surrounding cupboards are
adequately protected from damage during unpacking
and throughout the installation process.
• Ensure that two adequate and accessible
powerpoints are installed inside the refrigerator
recess before installing and connecting your
appliances. These powerpoints should also be
readily accessible after fridge installation is
completed.
• Do not use extension leads or power board or
double adapter under any circumstances as it may
lead to electric shock and / or fire. Seek assistance
of a licensed electrician if required.
• Unpack the connection kit and check for
completeness by referring to the "Connection
kit package contents" section.
NOTE:
Due to size and weight of the cabinets as well as
complexity of the task ensure that installation is attempted
with at least two able-bodied persons. You are strongly
urged to consider hiring Electrolux Service to do the
installation.