Battery Alert
The image given below indicates the battery level at different stages.
Empty
Plug it in, Power On/Off
When connected to a car charger with power, the unit will
automatically power on and start recording.
NOTE
1. Connect the DC car adaptor to the power connector (USB port) found on
the device.
2. Connect the other end of the DC car adaptor to your car's cigarette lighter.
3. When connected to the car charger the unit will power on automatically
and start recording. When the car's engine is turned off, the unit will
automatically turn off in a few seconds.
At other times, press the
Power button to turn it off.
Only use the DC car adaptor that comes with your device. Any
other adaptor might damage the device.
NOTE
UNIDEN iGO CAM 325
Low
Power button to turn it on, or press & hold the
9
Half full
Full
Vehicle Recorder