Unix/Linux - Lexmark C920 User Manual

6
On the Easy Install screen, click Install. All the necessary files are installed on your
computer.
7
Click Quit when installation is complete.
A PPD for your printer is also available in a downloadable software package on the Lexmark Web site
at www.lexmark.com.
Step 2: Create a desktop printer
1
In the Chooser, select the LaserWriter 8 driver.
2
If you have a routed network, select the default zone from the list. If you don't know which
zone to select, look on the Network Setup page under AppleTalk for Zone.
3
Select the new printer from the list.
4
If you don't know which printer to select, look on the Network Setup page under the
"AppleTalk" heading to find the default name of the printer.
5
Click Create.
6
Make sure there is an icon next to the printer name in the Chooser.
7
Close the Chooser window.
8
Verify printer installation.
a Click the desktop printer icon you just created.
b Choose Printing
– If the PPD file displayed in the PostScript Printer Description (PPD) file portion of the
menu is correct for your printer, printer setup is complete.
– If the PPD file displayed in the PostScript Printer Description (PPD) file portion of the
menu is not correct for your printer, repeat

UNIX/Linux

Your printer supports many UNIX and Linux platforms, such as Sun Solaris and Red Hat. Visit the
Lexmark Web site at www.lexmark.com for a complete list of supported UNIX and Linux platforms.
Note: The Sun Solaris and Linux packages are available on the drivers CD and on the
Lexmark Web site at www.lexmark.com.
Lexmark provides a printer driver package for each supported UNIX and Linux platform. The User's
Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX
and Linux environments.
You can download these packages from the Lexmark Web site. You may also find the driver package
you need on the drivers CD.
Install drivers for network printing
Change Setup.
UNIX/Linux
37
Step 1: Install a custom PPD file.