Cisco N9K-C93180YC-FX Configuration Manual page 20

Verifying FC NPV Examples
Step 2
Verifying FC NPV Examples
To display a list of devices on a server interface and their assigned NP uplinks, enter the show npv flogi-table
command on the Cisco Nexus 9000 Series switch:
switch# show npv flogi-table
--------------------------------------------------------------------------------
SERVER
INTERFACE VSAN FCID
---------------------------------------------------------------------------------
vfc3/1
vfc3/1
vfc3/1
vfc3/1
Total number of flogi = 4
Note For each server interface, the External Interface value displays the assigned NP uplink.
To display the status of the server interfaces and the NP uplink interfaces, enter the show npv status command:
switch# show npv status
npiv is enabled
disruptive load balancing is disabled
External Interfaces:
====================
Interface: fc1/47, State: Down
Interface: san-port-channel 200, State: Trunking
Interface: vfc-po149, State: Trunking
Interface: vfc-po4090, State: Trunking
Interface: vfc1/9, State: Trunking
Number of External Interfaces: 5
Server Interfaces:
==================
Interface: fc1/38, VSAN:
Cisco Nexus 9000 Series NX-OS FC NPV Configuration Guide
20
Command or Action
switch# show npv flogi-table [all]
1 0xee0008 10:00:00:00:c9:60:e4:9a 20:00:00:00:c9:60:e4:9a
1 0xee0009 20:00:00:00:0a:00:00:01 20:00:00:00:c9:60:e4:9a
1 0xee000a 20:00:00:00:0a:00:00:02 20:00:00:00:c9:60:e4:9a
1 0xee000b 33:33:33:33:33:33:33:33 20:00:00:00:c9:60:e4:9a
VSAN: 1, State: Up
VSAN: 200, State: Up
VSAN: 201, State: Up
VSAN: 202, State: Up, FCID: 0xea0020
VSAN: 100, State: Up
VSAN: 55, State: Up
VSAN: 201, State: Up
VSAN: 202, State: Up, FCID: 0xea0260
VSAN: 100, State: Up
VSAN: 201, State: Up
VSAN: 202, State: Up, FCID: 0xea0220
VSAN: 100, State: Up
VSAN: 201, State: Up
VSAN: 202, State: Up, FCID: 0xea0240
VSAN: 100, State: Up
100, State: Up
PORT NAME
Configuring N Port Virtualization
Purpose
Displays the FC NPV
configuration.
EXTERNAL
NODE NAME INTERFACE
fc2/1
fc2/2
fc2/3
fc2/4