Set Up A Bridge To Your Isp's Network Using A Vlan Tag Group - NETGEAR XR500 Nighthawk User Manual

4. Select Settings > Advanced Settings > VLAN/Bridge Settings.
The VLAN/Bridge Settings page displays.
5. Select the Enable VLAN/Bridge group check box.
The page expands.
6. Select the By bridge group radio button.
The page expands.
7. Select a Wired Ports check box or a Wireless check box:
• If your device is connected to an Ethernet port on the router, select the Wired Ports check box that
corresponds to the Ethernet port on the router to which the device is connected.
• If your device is connected to your router's WiFi network, select the Wireless check box that
corresponds to the router's WiFi network to which the device is connected.
Note You must select at least one Wired Ports or Wireless check box. You can select more
than one check box.
8. Click the Apply button.
Your settings are saved.

Set Up a Bridge to Your ISP's Network Using a VLAN Tag Group

For some devices, such as IPTVs, that are connected to the router's Ethernet LAN ports or WiFi network,
your ISP might require you to use a VLAN tag group to set up a bridge to the router's Internet interface and,
effectively, your ISP's network.
If you are subscribed to a service such as IPTV, the router might require VLAN tags to distinguish between
the Internet traffic and the IPTV traffic. A bridge with a VLAN tag group prevents packets that are sent
between the device and the router's Internet port from being processed through the router's Network Address
Translation (NAT) service.
You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to each VLAN tag group.
To set up a bridge to your ISP's network using a VLAN tag group:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The Dashboard displays.
4. Select Settings > Advanced Settings > VLAN/Bridge Settings.
The VLAN/Bridge Settings page displays.
5. Select the Enable VLAN/Bridge group check box.
XR500 Nighthawk Pro Gaming Router
Manage the Router's Network Settings
80