Listening To The Usb Device - JVC KD-R516 Instructions Manual

Changing the display information
Disc title/Album name/performer (folder
name)* = Track title (file name)* = Current
track number with the elapsed playing time
= Current track number with the clock
time = (back to the beginning)
* If the current disc is an audio CD, "NO NAME"
appears.
If an MP3/WMA file does not have Tag
information or <TAG DISPLAY> is set to
<TAG OFF> (
appear.

Listening to the USB device

This unit can play MP3/WMA tracks stored in a USB device.
~
] Turn on the power.
Caution on volume setting:
USB devices produce very little noise compared
with other sources. Lower the volume before
playing a USB to avoid damaging the speakers
by sudden increase of the output level.
If you have turned off the power (without
detaching the USB device)...
Pressing / SOURCE turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
10 ENGLISH
13), folder name and file name
Ÿ
USB input jack
All tracks will be played repeatedly until you change the
source or detach the USB device.
Using the remote controller
5 U / D ∞ : Selects folder of the
2 R / F 3 : Selects track
2 R / F 3
: Fast-forwards or
[Hold]
Stop playing and detaching the
USB device
Straightly pull it out from the unit.
"NO USB" appears. Press / SOURCE to listen to
another playback source.
You can operate the USB device in the same
way you operate the files on a disc. (
MP3/WMA
reverses the track
USB memory
9)