Toyota Tacoma 2018 Owner's Manual page 601

Hide thumbs Also See for Tacoma 2018:
Table of Contents

Advertisement

4
Position the jack at the correct
jack point as shown.
1
Front
2
Rear
Make sure the jack is positioned
on a level and solid place.
5
Raise the vehicle until the tire is
slightly raised off the ground.
When positioning the jack under
the rear axle housing, make sure
the groove on the top of the jack
fits with the rear axle housing.
Make sure to use only the jack
point indicated.
6
Remove all the wheel nuts and
the tire.
When resting the tire on the
ground, place the tire so that the
wheel design faces up to avoid
scratching the wheel surface.
8-2. Steps to take in an emergency
Front
601
Use only this area
as jack point.
8

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents