Toyota Tacoma 2018 Owner's Manual page 240

240
4-5. Using the driving support systems
Changing the pre-collision warning timing
■
The pre-collision warning timing can be changed on the multi-infor-
mation display as following:
The operation timing setting is retained when the engine switch is
turned off.
1
Press "<" or ">" of meter control switches and select
2 Press "∧" or "∨" of meter control switches and select "PCS", and
press
3
Press "∧" or "∨" of meter control switches and select "Sensitivity",
and press
1
Far
The warning will begin to
operate earlier than with the
default timing.
2
Middle
This is the default setting.
3
Near
The warning will begin to
operate later than with the
default timing.
.
to select the desired setting.
.