Accu-Chek Inform II Operator's Manual page 5
Hide thumbs
Also See for Inform II:
- Operator's manual (199 pages) ,
- Quick reference manual (39 pages) ,
- Manual (39 pages)
Table of Contents
Advertisement
On the packaging, on the identification plate of the meter, the battery pack, the base unit, or the code key
reader you may encounter the following symbols, shown here with their meaning:
Caution, consult accompanying documents. Refer to safety-related notes in the instructions
for use accompanying this product.
Temperature limitation (Store at)
Manufacturer
Date of manufacture
Catalog number
In vitro diagnostic medical device
IVD
Global Trade Item Number
Serial Number
SN
The system fulfills the Canadian and U.S. safety requirements (UL LISTED, in accordance
with UL 61010-1 and CAN/CSA-C22.2 No. 61010-1).
Power supply connection (Base Unit Light)
7.5V
1.7
Power supply connection (Base Unit)
12V
1,25A
Caution: Federal law restricts this device to sale by or on the order of a physician
Rx only
On meters with WLAN capability:
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
The compliance mark indicates that the product complies with the applicable standard and
establishes a traceable link between the equipment and the manufacturer, importer or their
agent responsible for compliance and for placing it on the Australian and New Zealand
market.
For other WLAN certifications, see label on bottom of battery compartment.
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator's Manual Version 6
Advertisement
Table of Contents
Need help?
Do you have a question about the Inform II and is the answer not in the manual?
Questions and answers
my code key reader does not work , how can i manually enter a new strip lot
To manually enter a new strip lot on an Accu-Chek Inform II code key reader, follow these steps:
1. Open the Main Menu screen.
2. Select "Strip Lots" to access the related menu.
3. Touch "Add" to enter a new test strip lot from a new code key.
4. Insert the new code key into the code key reader.
5. The LED on the reader will flash green, indicating it is ready to transfer data.
6. The reader remains ready to send data for a few seconds after transmission, allowing multiple meters to receive the data without reinserting the code key.
This completes the manual entry of a new strip lot using the code key reader.
This answer is automatically generated