Installing The Speaker; Angle Adjustment - Russound AW4-LS-BR Installation Manual

Stake mount
(included)
1) Determine the appropriate mounting position, making sure that it is not
near any buried utility, water, irrigation, or other lines/connections.
2) Using a rubber mallet or sledge, pound the stake into the ground leaving
enough clearance for the wire opening to be accessed.
3) Pass the speaker cable through the top of the stake and let it exit through
the wire opening.
4) Pound the stake the remaining distance needed into the ground, leaving
the top threaded section above ground level.
5) Attach the loudspeaker to the stake and turn the speaker clockwise until
it is securely mounted and facing the correct direction for your installation.
The speaker wire should be able to turn freely through the wire opening so
that it doesn't twist excessively. Leaving some twists in the speaker wire is
okay.
6) Turn the locknut so that it tightens against the stake, fi xing the
loudspeaker in the correct orientation.
Speaker
Wire Opening
Locknut
AW4-LS-BR Manual.indd 3
Surface Mount, Tree Mount, or other Options
The AW4-LS-BR speaker uses a standard ½" NPS thread so that it will work with
common landscape lighting mounting accessories such as those by Hadco®.
Philips Hadco Surface Mount Accessory, Model: MC1A
Philips Hadco Tree Mount Accessory, Model: TM1H

Angle Adjustment

Once the speaker has been oriented to the proper direction, the angle of the
speaker can be adjusted by loosening the hinge bolt adjusting the angle of
the speaker, and then tightening the hinge bolt, locking the speaker into the
desired angle.
Ground Level
Speaker Cable
AW4-LS-BR Installation Manual

INSTALLING THE SPEAKER

Hinge Bolt
3
3/28/17 9:10 AM