Related Manuals for Russound AW4-LS-BR
Summary of Contents for Russound AW4-LS-BR
- Page 1 AW4-LS-BR Landscape Speaker Installation Manual AW4-LS-BR Manual.indd 1 3/28/17 9:10 AM...
- Page 2 INTRODUCTION Introduction Thank you for selecting the AW4-LS-BR landscape speaker from Russound. This advanced loudspeaker offers an elegant, scalable platform for providing high quality audio to any outdoor area in even the harshest environmental conditions. Specially designed to withstand both extreme heat and cold, the speakers work great from the humid, hot conditions of summertime in Florida to the bone-chilling cold of a Minnesota winter.
-
Page 3: Installing The Speaker
(included) 1) Determine the appropriate mounting position, making sure that it is not The AW4-LS-BR speaker uses a standard ½” NPS thread so that it will work with near any buried utility, water, irrigation, or other lines/connections. common landscape lighting mounting accessories such as those by Hadco®. -
Page 4: Wiring Connections
The AW4-LS-BR includes a weep hole at the bottom edge of the front of the at least 6” underground or whatever minimum depth your local building code speaker for water drainage. - Page 5 21’ 44’ 147’ 518’ 1068’ 3610’ 158m 331m 1.1km 7’ 13’ 46’ 13’ 27’ 91’ 321’ 661’ 2234’ 201m 681m 4’ 9’ 29’ 8’ 17’ 57’ 202’ 417’ 1409’ 127m 429m AW4-LS-BR Installation Manual AW4-LS-BR Manual.indd 5 3/28/17 9:10 AM...
- Page 6 4. Connect the wires to the speaker terminals, being sure to observe proper speaker in the system). polarity. For standard speaker cable with red and black wires, connect both Ampli er Speaker Out AW10-LSUB-BR AW4-LS-BR AW4-LS-BR Installation Manual AW4-LS-BR Manual.indd 6 3/28/17 9:10 AM...
- Page 7 Adjust the Tap Settings Example: 300-Watt Amplifier (saving 20% for overhead, means 240 usable watts maximum) The AW4-LS-BR speaker has the following tap settings available: Tap Settings and maximum number of speakers (depending on wire gauge 70V - 2W, 4W, 8W, 16W, 32W...
- Page 8 (such as with a 4Ω or 8Ω amplifier or receiver), Use Russound AW series speaker cable or any reputable brand of 16 to 12 make sure that the tap setting switch is gauge multi-stranded wiring for amplifier- to-speaker connections.
-
Page 9: Connecting The Speaker
4. Check to make sure there are no stray strands of wire outside the terminals. If there are, remove the wire, twist the strands together, and reconnect the wire to the terminal. AW4-LS-BR Installation Manual AW4-LS-BR Manual.indd 9 3/28/17 9:10 AM... -
Page 10: Technical Specifications
In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, the unit must be shipped to Russound at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the unit in a corrugated container with at least three (3) inches of resilient material to protect the unit from damage in transit. - Page 11 AW4-LS-BR Installation Manual AW4-LS-BR Manual.indd 11 3/28/17 9:10 AM...
- Page 12 All trademarks are the property of their respective owners. 1 Forbes Road, Newmarket, NH 03857 Specifications are subject to change without notice. tel 603.659.5170 Russound is not responsible for typographical errors or omissions. email: tech@russound.com www.russound.com 03.28.17, Rev.1 AW4-LS-BR Manual.indd 12...