Manual Pairing For Stereo Speaker Connection - JVC SP-AT3-B Instruction Manual

Manual Pairing for Stereo Speaker
Connection
To manually pair the 2 speakers again for
wireless stereo connection:
• Switch off both the speakers and then
switch them on again. They will start
pairing to each other automatically.
OR
1. Press the Stereo Pair button on one of the
speakers, and then press the Stereo Pair
button on the other speaker. The STEREO
PAIR L/R indicators of both speakers will start flashing.
2. The unit will voice "CONNECTED" after stereo connection is
completed. The speaker you press the Stereo Pair button first will
be the left channel speaker. The STEREO PAIR L indicator and the
STEREO PAIR R indicator will be on to represent its audio channel.
Clear Bluetooth memory
Press and hold
Bluetooth® memory of the speaker. It is recommended to clear the Bluetooth®
memory of both speakers. To reconnect the wireless stereo connection, refer to
Manual Pairing for Stereo Speaker Connection section above.
14
button and Stereo Pair button on the speaker to clear the
Rear view of the speaker